How to level a pull behind camper

How to level a pull behind camper


Camping is everyone’s favorite summertime hobby, and let’s face it: spending time with loved ones in the great outdoors is one of the best ways to pass the time.

However, regardless of the sort of camper you use, camping does need a significant amount of planning and energy.

How to level a pull behind camper

Your towable, like motorized campers, was meant to be used when level at campgrounds, so this is not a duty you can skip, despite the fact that it is not particularly enjoyable.

Before you occupy your camper with your family, follow these steps to manually level it:

Now, leveling your camper is one of the most crucial activities to complete as part of setting up your rig at a campsite; the proper operation of basics such as the refrigerator is dependent on your camper being level.

Furthermore, when a camper is not level, numerous parts such as door frames, the plumbing system, and windows are subjected to additional tension, which can result in long-term problems and damage to the affected regions.

If you have a tow behind camper, this tutorial will show you how to level it so that all of the devices work properly and you eliminate irritations like goods rolling off counters.

Step-by-step directions for leveling a pull-behind camper

Tip: Because the exact methods vary from one draw behind to the next, it’s crucial to check your owner’s manual’s “leveling” section for specific instructions before you start.

Keep in mind that leveling these types of campers entails two key steps:

The first operation is to level the camper from side to side.

Operation 2: Align the camper from front to back.

Here’s how to do it:

Preliminaries

1. Find an area that is somewhat level.

Tow the camper to a level area and park it there.

Attempting to level your camper while parked on a slope not only complicates your task, but it can also be dangerous.

Furthermore, the ground on which you park must be strong enough to hold the whole weight of jacks and/or other support devices.

However, if you must park on an inclination, park the camper facing downwards, depending on where you are camping (than uphill). Because only the back wheels are usually locked, this is critical.

2. Prepare the location

Remove any obstacles such as rocks, tree branches, and other items in the area before you begin leveling; you don’t want them to obstruct the process.

The first operation is to level the camper from side to side.

It’s worth noting that the operation should be conducted in its entirety while the unit is still attached to your tow vehicle.

Step 1: Locate the side that need leveling.

Check the attitude – a minor level might be used to see if leveling is required.

If this is the case, level it from side to side as described in step 2 below.

Step 2: Set up leveling blocks made of plastic or wood.

Begin by placing one or more plastic or wood leveling blocks on the ground in front of the unit’s wheels.

The blocks should be placed in close proximity to the tires.

Tow the camper onto the leveling blocks in step three.

Tow the camper onto the blocks cautiously.

When the wheels have firmly stepped on the blocks, come to a halt.

Step 4: Evaluate the situation once more.

Check if the camper is now leveled with your level.

If not, change the wheel position (drive slightly forward/back) as needed.

Best Pull Behind Plows for Lawn Mowers and ATV/UTV

Step 5: Secure your tires with tire chocks.

While parking brakes can prevent the camper from rolling away, they aren’t fully safe.

As a result, once your tires are level, always place tire chocks under them; when used in conjunction with parking brakes, the wheels are far less likely to roll away.

This is the method for completing side-to-side leveling that is suggested (and not placing wheels in a hole).

Operation 2: Align the camper from front to back.

Here’s how you level the camper from the front to the back:

Place the jack pad/caster wheel under the hitch jack in step one.

The jack pad/caster wheel should be placed beneath the hitch jack as the first step.

Step 2: Detach the camper from the trailer.

Disconnect your tow vehicle’s hitch, all safety wires, wiring harness, and everything else.

Step 3: Make any required adjustments to the jack.

The jack is then adjusted down or up until it is level and firmly engaged from front to rear.

How to adjust pull behind bush hog

Step 4: Make sure the unit is stable.

Axle spring action can now be stopped with stabilizing jacks.

Ensure that all jacks have nearly the same pressure for maximum stability (on them).

A word about models with a leveling system.

Because it decreases the impact of uneven ground, a hydraulic leveling system makes choosing an acceptable parking spot for the camper easier and faster (keep in mind that the hydraulic jacks usually raise any affected low corners).

Note that when it comes to getting it level, units with hydraulic leveling systems are the easiest to level—for the most part, all you have to do is push a button on the control pad of the leveling system and presto!

If you’re unsure, examine your leveling system’s operation manual and follow the relatively simple directions to quickly and easily level your camper.

The manual also includes useful technical information, extra precautions, and directions on how to manually level a pull behind camper if the system fails.

Pull Behind Fence Line Mower Buying Guide

How to level a pull-behind camper — Some helpful hints and cautions

To level or lift the camper, never use stabilizing jacks.

Never use stabilizing jacks to elevate your camper; they are designed to balance the camper, not to bear weight.

While leveling the camper, keep your loved one away from it; you can never be sure that an accident will not occur.

On icy/slick conditions, avoid using leveling blocks since they can easily slip, making it more difficult to push the tires up onto them.

How to use a pull behind box scraper

Wrapping up

You want your camper to be as even and steady as possible when you plan to stay in the same spot for multiple days/weeks/months.

If you need to level your camper after checking the ground, repeat the instructions above once you’ve arrived at the spot.

Spending those few extra minutes during site setup is well worth it!

Regulations

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.